|
|
Piper
Custom 1911 Services
Please make checks payable to
George Piper
Sight Work
| Machine slide for, and install fixed front and rear
sights |
$100.00 |
| Drill and pin Front |
$10.00 |
| Machine slide for and install adjustable rear sight
set |
$125.00 |
| Change sights with no machining |
$35.00 |
Accuracy
Work
| Tighten slide to frame - peen method |
$85.00 |
| Tighten slide to frame - weld |
$100.00 |
| Fit aftermarket barrel: includes bushing, links,
chamfer, throat, timing check |
$225.00 |
Trigger Work
| Fit Triggers |
$25.00 |
| Fit triggers w/internal lightening modifications |
$45.00 |
| Basic Trigger Job with stock parts |
$85.00 |
| Full trigger job with all new parts |
$125.00 |
Hand Checker Frontstrap
| Grip area work 20, 25, 30, or 40 LPI |
$250.00 |
| Hand Serrate Frontstrap |
$75.00 |
| Mainspring housing blended, hand checkered and
rounded at heel |
$125.00 |
| Stipple Frontstrap |
$110.00 |
Grip and Thumb
Safety
| Fit and Blend S&A Grip Safety |
$75.00 |
| Fit and Blend Wilson, Brown or McCormick G.S. |
$95.00 |
| Fit Aftermarket Thumb Safety |
$35.00 |
| Fit, Shape and blend oversize thumb safety |
$65.00 |
Magazine Well
| Create chamfer 60 degrees |
$35.00 |
| Fit and Shape S&A Well |
$75.00 |
| Fit and Install Heinie or EGW well |
$150.00 |
| Machine frame, fit and blend Chen M.S. Housing |
$85.00 |
Slide Work
| Machine Ejection port, lower and flare |
$65.00 |
| Same, add front cut for live round |
$85.00 |
| Machine Front cocking serrations, match rear |
$100.00 |
| Machine ball cuts |
$85.00 |
| Hand-Serrate Rear of slide 40 LPI |
$75.00 |
| Machine 45 degree chamfers on side |
$40.00 |
Frame Work
| Bobtail Modifications |
$85.00 |
| Fit slide stop, create assembly notch |
$40.00 |
| Shorter stop pin & chamfer frame hole |
$40.00 |
| Fit magazine release, blend flush |
$40.00 |
Reliability
| Fit oversize ejector - cut and shape |
$45.00 |
| if needed, drill for cross pin - add |
$20.00 |
| Fit new extractor, tune and polish |
$35.00 |
| Polish feedramp |
$40.00 |
| Machine feedramp to correct angle & depth,
polish |
$85.00 |
| True & polish bolt face |
$25.00 |
| Throat & polish barrel |
$45.00 |
General
| Dehorn Gun and all parts |
$125.00 |
| NOTE - there are many services not listed due to
variations |
P.O.R |
Please make checks payable to George
Piper
Parts: There are many quality parts
available as well as many 'not-so-good'. Please allow me to
choose the part or parts that will work best for your
particular gun, and allow me to explain why I choose the
part.
|
|
|